Techniques for selecting the installation location of low-temperature chillers

A low-temperature chiller is a cooling device that can provide constant temperature, constant current, and constant pressure. When installing a chiller, according to the design or customer requirements, low-temperature chillers are generally installed in specialized machine rooms or placed near workshop process equipment. The main installation location can be selected according to the cooling capacity and cooling situation. So what are the techniques for selecting the installation location of low-temperature chillers? Below, the Jimes Refrigeration editor will provide a detailed introduction for everyone.

1、 According to the cooling capacity of the low-temperature chiller

1. If the cooling capacity of the low-temperature chiller is greater than or equal to 20HP, the equipment can be installed in the machine room. Due to the large volume of the equipment, as well as the water pumps, water tanks, etc. in the system, it occupies a relatively large space. Mainly dedicated to the installation of computer rooms.

2. The cooling capacity of the low-temperature chiller is less than 20HP. If there is a location in the production workshop, the equipment can be directly installed in the workshop, close to the equipment, against the wall or column corner, which can save pipes and machine rooms.

2、 According to the cooling method of low-temperature chiller

1. If it is an air-cooled low-temperature chiller, it should not be installed directly next to production equipment in principle, because the hot air exchanged by the air-cooled type is directly discharged into the workshop, which has a significant impact on air conditioners with temperature and humidity requirements. Even if there are no temperature and humidity requirements, it will still affect the working environment temperature of workers. Therefore, it is generally installed specifically in well ventilated computer rooms or outdoors.

2. If it is a water-cooled low-temperature chiller with a combined cooling capacity as mentioned above, it can be directly installed in the production workshop because the heat exchange is carried out through a closed system circulating through pipelines, which has a relatively small impact on the temperature and humidity of the environment.

The tips for selecting the installation location of low-temperature chillers are shared here. Low temperature chillers are equipped with various safety protection devices, which have stable performance, low noise, long service life, and simple operation; Adopting a liquid crystal display human-machine interface, the operation is simple and convenient, and the operating status is clear at a glance.